Elmo CRP-26 Manual

A SERVICE OF

next previous

51

Setting

Standby mode

This function is available when operating the projector via

network.

Network .... Supply the power to the network function even

after turning off the projector by pressing the

ON/STAND-BY button on the remote control.

You can turn on/off the projector via network,

modify network environment, and receive

an e-mail about projector status while the

projector is powered off.

Eco ............ Select Eco when you do not use the projector

via network. The projector’s network function

will stop when turning off the projector, you

can not turn on the projector via network.

Refer to the owner’s manual of “Network Set-up and

Operation”.

Note:

•FactorydefaultisEco.

•WhenselectingNetwork, the cooling fans may be

running depending on the temperature inside the

projector even if the projector is turned off.

•SetStandbymodetoNetwork when On start, control

port or network functions are available.

Closed Caption

Closed Caption

Closed Caption is a printed version of the program sound or

other information displayed on the screen. If the input signal

contains closed captions, you can turn on the feature and

switch the channels. Press

the Point

▲▼

buttons to select

Off, CC1, CC2, CC3 or CC4.

If the closed caption is not clear, you can change the text

from Color to White.

Press the Point ▲▼ buttons to select

Off, CC1, CC2, CC3 or CC4, and then

press the SELECT button.

Note:

The Closed Caption is available only under the situation

below.

  •

When the input signal is Component (for adjustment

only), Video or S-video,

and the system is set to Auto,

NTSC or 480i, the Closed caption is available.

  •IfthesystemissettoAuto,andchooseNTSCor

480i as the input signal, the Closed caption will be

available.

  •ClosedCaptionwillbeunavailablewhenunderother

setting conditions.

  •The Closed caption is unavailable when On-Screen

menu and P-Timer are displayed.

  •TheitemofClosedCaptionisdisplayedingraywhileit

is not available.

Notes on using the document camera:

- The projector can supply 12V DC power to

the document camera at Network mode. When

using the document camera, set Standby

mode to Network.

- When DC OUT 12V jack is plugged in, the

cooling fans are running at Network mode

even if the projector is in standby mode.