12
OPERATING INSTRUCTIONS
TURNING THE SYSTEM ‘ON’
Plug the unit into the 120V 60Hz AC outlet.
At the front of the unit, the light within the POWER/STANDBY button will be red
to indicate that the unit is in standby (standby means plugged-in but not switched
on).
Main LCD display lights up and automatically shows self-demonstration mode if,
• Clock is not set.
• The unit is plugged in AC power the first time, or
• The AC power has been interrupted.
The display lighted colors change in sequence:
Switch the unit on by pressing the POWER/STANDBY button on the front panel
or the remote control. The display self-demonstration mode stops.
The unit is now ready to use.
COLOR Button
You may turn the color-changing feature “On” or “Off” by pressing the COLOR
Button on front panel or remote control.
(To switch the unit back to standby, simply press button again.)
MS3105_120503.p65 5/12/2003, 12:0312
