A SERVICE OF

logo

Open as PDF
next previous
Loading Transparencies
When printing on transparencies, follow the steps below:
1. Reposition the paper support.
2. Place a stack of transparencies face up on a sheet of plain
paper. The stack is face up if the cut corner is at the top
right when you hold the long edges of the transparencies.
Note:
You can load up to 10 transparencies.
3. Load transparencies into the sheet feeder with the printable
side up.
4. Select
Ink Jet Transparencies
as the Media Type setting in
the printer driver. For more details on making printer
driver settings, see online help for Windows, or Chapter 5
for Macintosh.
Remove the
paper support
Reinstall it into
the slots
new-e29
L
Easter10 Ref. Guide
Rev.C
A5 size Chapter 6
1-07-98 DR, pass 2
6-6
Printing on Special Paper