5
Troubleshooting and Maintenance
5-23
Flamingo
Rev. C
A5 size TROUBLE.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
The position of the printout is not correct.
Make sure that you are using the correct page length and margin
settings in your application program.
Graphics don’t print correctly.
Make sure that your software program is set for the printer
emulation you are using. For example, if you are using the LJ4
emulation, be sure that your graphics software is set for a LaserJet
4 printer.
Graphics require large amounts of memory; see “Memory
modules” on page 3-47 for more help.
SelecType does not function as expected.
Software programs override SelecType settings. Use software
settings instead of SelecType settings whenever possible.
Your settings may have been changed by your software program.
Perform a factory reset (initialize) with the SelecType Init
function on the SelecType Setup Menu. For more information, see
Chapter 4, “SelecType”.
You may not have reset the printer after making settings. Press
the
ALT
and
Continue
buttons at the same time to reset the printer
and enable the new settings.
Cover A will not close completely
The imaging cartridge is not installed correctly. To properly
install the cartridge, see “Replacing the Imaging Cartridge” on
page 5-36.
