Epson 7200 Manual

next previous

EPSON PowerLite 5300/7200/7300 Projector

6 -

EPSON

PowerLite 5300/7200/7300 Projector

1/99

3. Use a screwdriver, coin, or similar object to loosen the two

retaining screws on the lamp cover. When the screws are

loose, lift off the lamp cover. (You cannot remove these

screws from the cover.

)

4. Use a screwdriver, coin, or similar object to loosen the two

screws holding the lamp unit in position. (You cannot

remove these screws.)

5. Lift up the handle and pull out the lamp unit.

6. Gently insert the new lamp unit by lowering it into position.

Make sure it’s inserted securely. Tighten the screws on the

new lamp unit.

7. Replace the lamp cover and tighten the cover screws. (Make

sure the lamp cover is securely fastened. The projector turns

itself off if the lamp cover is open.)

Information Reference List

Engineering Change Notices

None.

Technical Information Bulletins

None.

Product Support Bulletins

None.