A SERVICE OF

logo

Signal
Return
Signal
Direction
Description
Pin
Pin
10
28
ACKNLG
OUT
About a 10-microsecond
pulse. LOW indicates data
has been received and
that the printer is ready to
accept more data.
11
29
BUSY
OUT A HIGH signal indicates
that the printer cannot
receive data. The signal
goes HIGH in the following
cases:
0
During data entry
(for each character)
0
During printing
0
During off-line state
Q
During printer-error state
12
30
PE
OUT
A HIGH signal indicates
that the printer is out of
paper.
13 -
SLCT
OUT
Pulled up to +5V through
3.3 K ohm resistance.
14 - AUTOFEED IN
During the LOW state, the
paper is automatically
fed one line after printing.
(The signal level can be
fixed using SelecType.)
15 -
16 -
17 -
NC
-
GND -
CHASSIS -
GND
Not used.
Logic ground level.
Printer’s chassis ground,
which is isolated from the
logic ground.
18 -
NC
-
19-30 - GND -
Not used.
Twisted-pair return signal
ground level.
A-10 Technical Specifications