A SERVICE OF

logo

78
Printout has smears on the bottom edge
Printing is too slow
Blank pages print
Run the Head Cleaning utility to clear any clogged
nozzles.See Cleaning the Print Head on page 65.
Printout has smears on the bottom edge
If the paper is curled toward the printable side, flatten it or
curl it slightly in the opposite direction.
Set the adjust lever to the + position.
Printing is too slow
Make sure that the Media Type setting in the Control Panel is
correct.
Paper Does Not Feed Correctly
If one of the following problems has occurred, try the solution(s)
listed for that problem.
Paper does not feed
Multiple pages feed
The paper jams
Paper is not ejected fully or is wrinkled