52 Saving and Storing Photos
Removing a Memory Card
Once you’re finished copying photos from your memory card, follow the steps
below to prepare your computer before removing it. Be sure to remove any cards
before unplugging the USB cable from your RX620.
Caution:
Do not eject a card while the memory card light is flashing, or without performing the
steps described below, or you may lose data on the card. Be sure all cards have been
removed before unplugging the USB cable.
1. On a Macintosh, drag the memory card icon from your desktop to the trash.
If you’re using Windows XP or 2000, click the
Unplug or Eject
Hardware
icon on the taskbar. In Windows XP, click Safely Remove USB
Mass Storage Device
. In Windows 2000, click Stop USB Mass Storage
Device
.
Note:
In Windows 98 or Me, you don’t need to do anything on your computer before
removing a card.
2. Remove the card by pulling it straight out of the slot.
