Introduction
3
Macintosh System Requirements
To use EPSON Stylus RIP with a Macintosh in either a
standalone or network environment as a print server, your
system should meet the following minimum requirements:
◗ Power Macintosh,
®
iMac
™
series, or Power Macintosh G3
or G4 series
◗ At least 16MB of available RAM for the EPSON Stylus
RIP software (20MB or more is recommended), in
addition to the RAM needed by your operating system and
other applications
◗
At least 52MB of free hard disk space to install the software
and at least 150MB of free hard disk space for processing large
files
◗ Macintosh Operating System 8.5.1 or later
◗ CD-ROM drive
◗ Serial, Ethernet, or USB connection to the printer. The
USB connection can be either a built-in USB port or the
EPSON USB Adapter kit (part number C-USB-PK4).
To set up a Macintosh as a client on a network using the
EPSON Stylus RIP, your system must have the following
minimum configuration:
◗ Macintosh Centris,
®
Macintosh Quadra,
®
Performa,
®
Power
Macintosh, iMac series, or Power Macintosh G3 or G4
series
◗ Ethernet
™
AppleTalk
®
connection with the Macintosh set
up as the EPSON Stylus RIP print server
◗ 8MB RAM
◗
At least 2MB of free hard disk space to install the software and
at least 150MB of free hard disk space for processing large files
◗ Macintosh Operating System 7.6.1 or later
◗ CD-ROM drive
Nflight.bk Page 3 Friday, September 1, 2000 8:32 AM
