A SERVICE OF

logo

Open as PDF
next previous
Stylus Color 600 Service Manual
Rev. A
5-
2
Error status
Indicators
Recovery
Power Ink Out
(Black)
Ink Out
(Color)
Paper Out
Paper Out --- --- --- On Load paper by pressing
load/eject button.
Paper jam condition --- Off Off Blink Eliminate a paper then press
load/eject button.
No Ink cartridge or Ink
end(black)
--- On --- --- Install a new black ink cartridge
by pressing load/eject button
for
3-seconds.
No Ink cartridge or Ink
end(color)
--- --- On --- Install a new color ink cartridge
by pressing load/eject button
for
3-seconds.
Maintenance request Blink Blink Blink Blink Change the waste ink drain
tank and reset the EEPROM.
Fatal error Blink On On Blink Turn on the printer and turn it
on again. If printer can not
recover,repair the suitable part.
Table 5-3. Printer Condition and Panel Status