Applying Power and Setting the Volume
1. Turn the radio on by
pressing the POWER
button to the
in
position.
The display lights and
shows the last-selected
Channel number.
Note: To turn the radio off, release the POWER button to
the
out
position.
2. Press the Channel Up or
Channel down key (
or
) to display the desired
Channel number.
Note: If you press and hold either key, the radio changes
Channels rapidly.
3. Press the Monitor Key
(
).
Adjust the speaker volume
to a comfortable level by
pressing the Volume Up
(
) or Volume Down
(
) Key
Note: If you hold down either of the keys, the volume
steps rapidly in the selected direction.
5. Press
again.
Note: While Monitor is ON, your radio may detect (on the
selected channel) transmissions from stations
outside your own system, as well as
transmissions within your system.
Receive
1. When a call is received, the
Transmit/Receive Indicator
blinks RED. If the signal is
coded with CTCSS, DCS,
or 2-Tone Code, the CALL
indicator appears on the
LCD.
05
07
MON
Volume
Keys
UD
Monitor Key
02
CALL
- 12 -
