FOX 2G Tx/Rx AV • Conguration
Configuration, cont’d
3-6
Symbols used in this manual
When programming in the eld, certain characters are most
conveniently represented by the hexadecimal equivalent of
their ASCII value. For convenience, the table below shows the
hexadecimal equivalent of each ASCII command:
N
Apart from G (gain) and g (attenuation), upper and
lower case characters can be used interchangeably in SIS
commands for this product. For example, on page 3-8,
either "C" or "c" can be used to set the color value.
The symbols (
X/
values) dened in this section are the variables
used in the elds of the command response table that begins on
page 3-8.
]
— carriage return with line feed
}
— carriage return (no line feed)
• — space character
E
— Escape key
X!
— Input video type
0 = Auto
4 = Component
5 = S-video
6 = Composite
X@
— Color, tint, contrast, or brightness adjustment (0 to 127)
X#
— Auto Memory, blanking, or audio mute status
0 = disabled
1 = enabled
ASCII to HEX Conversion Table
Space
.
