7
Start
Close the . Press
the START/PAUSE button
to initiate the wash program.
This button also functions as the
Delay Start.
Pause
To pause the
during its wash cycle, press the
START/PAUSE button and wait
for three beeps before opening.
Restart by pressing the
START/PAUSE button. Forcing
the drawer open in mid-cycle
may cause damage or injury.
Finish
The will beep six
times to indicate the end of the
wash program. At the end of the
wash program the drying fan will
continue to run for a set time or
until the drawer is opened. The
fan assists with drying and uses
negligible amounts of energy. It
is normal for some water to
remain in the drain filter area
after the wash program is
complete.
DELAY START MODE (optional)
The start of the wash program can be delayed from 1 to 12 hours.
To activate Delay Start:
1. Press and hold the START/PAUSE button until the light above the START/PAUSE
button turns orange.
2. The will emit a ‘beep’ as you hold down the START/PAUSE button,
each beep indicates another hour delay. Continue holding the START/PAUSE button
until the desired delay time is reached.
3. The will start once the delay time has elapsed and the
drawer is closed.
To cancel Delay Start, press the POWER button or hold the START/PAUSE button until
the light turns green.
Lock Button (optional)
The Lock button activates/ deactivates the
Keylock or the Childlock functions.
Keylock
The Keylock function disables all the buttons on the
. To activate, press and hold the
LOCK button until you hear one beep (about 3
seconds).
Childlock
The Childlock feature locks the and
disables all the buttons. To activate, press and hold
the LOCK button until you hear two beeps (about 5
seconds).
To cancel Keylock or Childlock, press and hold the
LOCK button until the green light above the LOCK
button disappears.
Note
If the is operating
and a power failure occurs, it
will stop. The
may be unable to be opened
during this time. When the
power supply is resumed, the
will restart in the
same part of the wash program.
7 8
