A SERVICE OF

logo

5
M10 x 68mm Bolt (33)
M10 x 45mm Bolt (40)
M10 x 180mm Bolt (37)
M8 x 58mm Bolt (30)
M10 Nylon Locknut (32)
M8 Nylon Locknut (34)
M6 Washer (36)
M8 Washer (31)
M6 x 16mm Screw (35)
M6 x 53mm Screw (42)
M10 Washer (38)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.