9
Automatic Swing Airfl ow Direction (up-down)
Perform this function while the air
conditioner is in operation.
Press the SWING button on the remote
control.
To stop the function, press the SWING
button again.
Press AIR DIRECTION button to lock
louver in desired position.
•
•
•
•
! CAUTION
The AIR DIRECTION and SWING buttons will be disabled when the air condi-
tioner is not in operation (including when the TIMER ON is set).
Do not operate the air conditioner for long periods with the airfl ow direction
set downward in cooling or dry mode. Otherwise, condensation may occur on
the surface of the horizontal louver causing moisture to drop on to the fl oor
or on furnishings.
Do not move the horizontal louver manually. Always use the AIR DIRECTION
or SWING button. If you move this louver manually, it may malfunction dur-
ing operation. If the louver malfunctions, stop the air conditioner once and
restart it.
When the air conditioner is started immediately after it was stopped, the
horizontal louver might not move for approximately 10 seconds.
Open angle of the horizontal louver should not be set too small, as COOLING
or HEATING performance may be impaired due to too restricted airfl ow area.
Do not operate unit with horizontal louver in closed position.
When the air conditioner is connected to power (initial power), the horizontal
louver may generate a sound for 10 seconds; this is a normal operation.
•
•
•
•
•
•
•
ADJUSTING AIRFLOW DIRECTION (CONT.)
