Dakota Series Owner’s Manual 27
Customizing the Dakota
—select water
temperature in degrees Celsius or
degrees Fahrenheit.
—select barometric
pressure units in inches (Hg),
millibars, or hectopascals.
Position Format
Use the default settings unless
you are using a map or chart that
species a different position format.
To change the position format:
Touch Setup > Position Format.
Modifying the Compass
Touch > .
—select the type of
directional heading shown on the
compass:
• —sets
the Compass page reading to
directional letters (N, S, E, W).
• —sets the
Compass page reading to degrees
(0°–359°).
• —sets the Compass page
reading to mils (0 mils–1000
mils).
—select the north
reference of the compass:
• —sets true north as the
heading reference.
• —automatically sets
the magnetic declination for your
location.
• —sets grid north as the
heading reference (0°).
• —allows you to set the
magnetic variation value.
(depending on
your unit)—select to show
the Bearing Pointer, which indicates
the direction to your destination.
Touch to select the Course
