T25227 (Mfg. since 09/13)-10-
Use the 3
5
⁄8" triangular platen accessory
and either a red or white sanding pad.
The sanding pads use a hook-and-loop
system, which provides easy attachment
and removal. To install the sanding pad,
align the pad with the platen and press on
firmly (see Figure 6).
Sanding
Tips for sanding:
• Practice on similar scrap material
and inspect results before working on
intended workpiece.
• Adjust speed according to materi-
al type. Using high speed removes
material quickly and can result in non-
uniform surfaces.
• Use sweeping side-to-side motions
with uniform pressure and speed.
• Check sanding pads for wear and dust
accumulation between jobs. Clean or
replace sanding pads as necessary.
Figure 6. Attaching sanding pad.
Sanding Pad
Sanding
Platen
