A SERVICE OF

logo

Assembly
24
Plug the power button harness and the motor harness
together. Push firmly to snap the connectors together.
Motor Harness
Power Button
Harness
15
25
Fit the connectors between the tabs inside the vehicle.
Bend the wires down (90˚ angle).
26
Fit the motor harness connector up through the square
hole in the bottom of the back fender.
27
Carefully fit the back fender onto the vehicle. DO NOT
pinch the motor harness wires.
Insert four screws through the back fender and into
the vehicle.
Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
28
With the back end facing you, insert eight more screws
through the back fender and into the vehicle.
Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Tab
Tab
Connectors
Back Fender
Motor Harness
Connector
Back Fender
Back Fender
Back View