Problem and solution How to do it
Blurred photos
SmartFocus
Sharpen blurred photos. It is turned on
by default. Use these instructions to turn
it on if it is currently off. This preference
affects all printed photos.
1. Remove any memory cards, then
press
or
.
2. Select Preferences, then press OK.
3. Select Smart focus, then press OK.
4.
Press
or to highlight On, then
press OK.
Photos with poor lighting and contrast
Adaptive Lighting
Improve the lighting and contrast in
prints. This preference affects all printed
photos.
1. Remove any memory cards, then
press
or .
2. Select Preferences, then press OK.
3. Select Adaptive Lighting, then
press OK.
4.
Press
or to highlight On, then
press OK.
Printing your photos
Printing your photos involves three steps: selecting a print layout, setting print quality,
and selecting a print method.
Selecting a layout
The printer prompts you to select a print layout each time you insert a memory card.
Layout options
Do this
1. Insert a memory card.
2.
Use
or to select a layout:
– Print one photo per sheet
– Print two photos per sheet
– Print four photos per sheet
3. Press OK.
The printer may rotate your photos
to fit the layout.
Note When borderless printing is
turned off, all pages print with a narrow
white border around the outside edges
of the paper. To turn off borderless
printing, see Printer menu.
Setting print quality
Best quality is the default and produces the highest quality photos. Normal quality
conserves ink and prints faster.
To change the print quality to Normal
1.
Remove any memory cards, then press
or
.
Chapter 3
26 HP Photosmart 330 series
