Connecting to a Netware 3.12 server
Windows 95 SR2
Connecting to a Netware 3.12 server
Windows 95 SR2 Requirements
• HP Vectra with Windows 95 SR2 installed.
• 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1.
• File Name: OEMSETUP.INF Size: 41KB Date: 3/14/97
• Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is
located at C:\Masters\Win95\System\Cabs\)
• Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX,
and
• NWLink NetBIOS transfer protocols.
Device Configuration
• Network Driver Optimization Normal
• Full Duplex Disabled
• Boot PROM Disabled
• Media Type 10BASE-T
Procedure
1 With the HP Vectra turned off, install the 3COM Etherlink III 3C905
Vectra VL8 Vectra VL7
I / O B a s e A d d r e s s F C 4 0 h ( P C I ) F C C 0 h ( P C I )
Interrupt Request 11 (PCI) 9 (PCI)
905.bk : ch_2.fb4 Page 1 Thursday, October 22, 1998 9:51 AM
