A SERVICE OF

logo

Open as PDF
next previous
Advanced Configuration and Management Guide
5. Enter the name of the route map in the Route Map Name field.
6. Enter the sequence (instance) number in the Sequence field. The routing switch applies the instances in
ascending numerical order. Once an instance comparison results in a “true” evaluation, the routing switch
stops applying instances and applies the match and set statements you configure for the instance.
7. Select the action you want the routing switch to perform if the comparison results in a “true” value:
• If you select Deny, the routing switch does not advertise or learn the route.
• If you select Permit, the routing switch applies the match and set statements associated with this route
map instance.
8. Click the Add button to apply the changes to the device’s running-config file.
9. Select the Route Map Match
link at the bottom of the panel to display the BGP Route Map Match panel, as
shown in the following example.
10 - 64