A SERVICE OF

logo

http://www.hp.com/go/clj9500mfp
258 Chapter 9 – Problem solving
Rev. 1.0
Clearing jams from the duplexer
Jam inside the duplexer
Follow these instructions to clear jams in the duplexer.
1 Move the finishing device away from the MFP to gain access to the lower
left door. To do this, stand on the left side of the MFP and pull the finishing
device straight toward you.
2 Open the lower left door.
WARNING
Avoid touching the fusing area above the duplexer. It can be hot.
3 Remove the duplexer by pressing the green lever down and pulling the unit
out until it stops.
1
2
3