54 HP ProLiant DL360 Generation 4p Server (SAS Model) User Guide
PCI expansion slot definitions
Slot* Board Size Connector Interconnect
PCI-X expansion slot 1 Half-length 133 MHz, 3.3 V 64-bit
PCI-X expansion slot 2 Full-length 133 MHz, 3.3 V 64-bit
PCI Express expansion
slot 1 (optional)
Half-length x8 x1, x4, or x8
PCI Express expansion
slot 2 (optional)
Full-length x8 x1, x4, or x8
* Depending on the model of the server, slot 1 or slot 2 will be pre-populated with a
storage controller. If the expansion slot is populated with the standard PCI-X storage
controller card, it should not be converted to PCI Express.
Expansion board
1. Power down the server ("Powering down the server" on page 24).
2. Extend the server from the rack, if applicable ("Extending the server from the
rack" on page 25
).
3. Remove the access panel ("Removing the access panel" on page 26
).
4. Remove the PCI riser board assembly ("Removing PCI riser board assembly"
on page 27
).
