Setting Up the Monitor
User’s Guide 3–11
5. Apply power to the computer and monitor, and other attached
devices.
6. The Monitor Status displays:
❏ VGA Input: Active or No Input Signal
❏ DVI Input: Active or No Input Signal
❏ Mode: Settings
7. Adjust the monitor as needed for your comfort using the
monitor’s tilt adjustment capability.
Adjusting the Tilt
Å
WARNING: Tilt the monitor
carefully. If you tilt the monitor back
more than 30 degrees, beyond its
easily adjustable position, it could
fall over. Position the monitor so
that it cannot fall off the table if
bumped.
8. Test the monitor function. If it does not function correctly,
configure the monitor as described in the next chapter,
“Operating the Monitor”.
