Computer feet
Description Spare part number
Rubber Feet Kit 438557-001
The computer feet are adhesive-backed rubber pads. There are 8 rubber feet. The feet attach to the base
enclosure in the locations illustrated below.
Memory module
Description Spare part number
1024-MB, 667-MHz, PC2-5300, 1-DIMM 409060-001
512-MB, 667-MHz, PC2-5300, 1-DIMM 447518-001
256-MB, 667-MHz, PC2-5300, 1-DIMM 447517-001
Before removing the memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 32).
Remove the external memory module:
1.
Position the computer with the rear panel toward you.
2. Loosen the Phillips PM2.5×6.0 screw (1) that secures the memory/WLAN module compartment
cover to the computer.
Component replacement procedures 35
