A SERVICE OF

logo

4. Secure both edges of the media using the media clips (1) on the left and right side, making sure that
the media is not hanging loosely.
5. Slide the cutter (1) across the media. The media will be held securely by the media clips (2).
Tip After cutting the media you can rewind excess media by using the REWIND option the
key or the REWIND menu.
Use the take-up reel
NOTE The HP Designjet 8000s Take-Up Reel Kit (Q6681A) is an optional accessory.
ENWW Use the take-up reel 45
How do I load/unload media