Hewlett-Packard KQ497AA Manual

A SERVICE OF

next previous

Using the Keyboard 27

3 Push and hold the Connect button (B) on the underside of the mouse until the blue LED

on the receiver stops flashing.

After the mouse connection is established, repeat the procedure with the keyboard:

1 Push the Connect button on the receiver, and hold it for 5 to 10 seconds until the blue

light starts to flash.

2 Push and hold the Connect button (C) on the underside of the keyboard until the blue

LED on the receiver stops flashing.

For additional mouse and keyboard troubleshooting tips, refer to the Troubleshooting and

Maintenance Guide.

NOTE: The receiver connection session times out after 60 seconds. To ensure the

connection was established instead of the receiver timing out, move the mouse and check

for response.