If you have the Stamp faxes option turned on, you might also want to turn on autoreduction. This reduces
the size of the incoming faxes slightly, and prevents the page-stamp from forcing a fax onto two pages.
NOTE: Make sure that the default media size setting matches the size of the media that is loaded in
the tray.
1. On the control panel, press the Setup button.
2. Use the arrow buttons to select the Fax setup menu, and then press the OK button.
3. Use the arrow buttons to select the Fax Recv. setup menu, and then press the OK button.
4. Use the arrow buttons to select the Fit to page menu, and then press the OK button.
5. Use the arrow buttons to select the On or Off option, and then press the OK button to save the
selection.
Set fax reprint settings
The default fax reprint setting is On. To change this setting from the control panel, complete the following
steps:
1. On the control panel, press the Setup
button.
2. Use the arrow buttons to select the Fax setup menu, and then press the OK button.
3. Use the arrow buttons to select the Fax Recv. setup menu, and then press the OK button.
4. Use the arrow buttons to select the Reprint faxes menu, and then press the OK button.
5. Use the arrow buttons to select the On or Off option, and then press the OK button.
Set the silence-detect mode
This setting controls whether or not you can receive faxes from older-model fax machines that do not
emit a fax signal during fax transmissions. At the time of this publication, these silent-model fax machines
represented very few of the fax machines in use. The default setting is Off. The silence-detect mode
setting should be changed only if you regularly receive faxes from someone who uses an older-model
fax machine.
1. On the control panel, press the Setup
button.
2. Use the arrow buttons to select the Fax setup menu, and then press the OK button.
3. Use the arrow buttons to select the Fax Recv. setup menu, and then press the OK button.
4. Use the arrow buttons to select the Silence detect menu, and then press the OK button.
5. Use the arrow buttons to select the On or Off option, and then press the OK button to save the
selection.
Set the fax volume
Control the volume of the fax sounds from the control panel. You can make changes to the following
sounds:
●
The fax sounds that are associated with incoming and outgoing faxes
●
The ring for incoming faxes
112 Chapter 10 Fax (M1210 Series only) ENWW
