5–14 Maintenance and Service Guide
Removal and Replacement Procedures
3. Disconnect the 2 antenna cables 1 and 2 from the Mini PCI
communications card.
4. Spread the retaining tabs 3 that secure the Mini PCI
communications card to the socket. The board tilts up.
5. Pull the card away from the socket at a 45-degree angle 4.
Removing a Mini PCI Communications Card
Reverse the above procedure to install a Mini PCI
communications card.
Ä
CAUTION: When reattaching the cables to the board, place a finger
behind the board to protect it from breakage.
Ä
CAUTION: To prevent an unresponsive system and the display of a
warning message, install only a Mini PCI device authorized for use in
your notebook by the governmental agency that regulates wireless
devices in your country. If you install a device and then receive a
warning message, remove the device to restore notebook functionality.
Then contact Customer Care.
