Supported Fibre Channel
Supported Fibre ChannelSupported Fibre Channel
Supported Fibre Channel
Hardware
HardwareHardware
Hardware
TruCluster Server supports the following Fibre Channel hardware. For more information on the supported Fibre Channel
solutions, see the TruCluster Server
Release Notes
and the
Cluster Hardware Configuration
manual. For a list of supported
Fibre Channel switches, see the S
AN Product Support Tables for the SAN Design Reference Guide
at the following URL:
http://www.hp.com/products/StorageWorks/san/documentation.html
.
Device
DeviceDevice
Device
Description
DescriptionDescription
Description
KGPSA-BC
PCI-to-Fibre Channel host adapter
KGPSA-CA
PCI-to-Fibre Channel host adapter
KGPSA-DA
PCI-to-Fibre Channel host adapter
KGPSA-EA (302784-B21, FCA2384)
2Gb PCI or PCI-X to FibreChannel Host Bus Aadapter
HSG60
Array Controller
HSG80
Array Controller
HSV110
Array Controller
XP128/1024
Array Controller
XP512/48
Array Controller
MSA1000 (3R-A4328-AA, 201723-B22)
Storage Works modular SAN array
HSG60 and HSG80 controllers may be contained in many cabinet configurations including MA6000, RA8000, MA8000, ESA12000, EMA12000, and
EMA16000. HSV110 controllers may be contained in many cabinet configurations. Any model of the Enterprise Virtual Array (EVA) product set based on the
HSV110 controller is supported.
For more information on the supported XP array hardware, see the XP/Tru64 Connectivity Streams at the following URLs:
http://www.XP128/1024 Connectivity Streams and Other Documents.com
http://www.XP48/512 Connectivity Streams and Other Documents.com
Fibre Channel Arbitrated
Fibre Channel ArbitratedFibre Channel Arbitrated
Fibre Channel Arbitrated
Loop Support
Loop SupportLoop Support
Loop Support
TruCluster Server supports Fibre Channel arbitrated loop for clusters with a maximum of two members only. The KGPSA-CA
is the only Fibre Channel adapter supported for arbitrated loop configurations. The DS-SWXHB-07 seven-port Fibre
Channel hub is required to build an arbitrated loop configuration and is restricted to use with DS10, DS20, DS20E, and
ES40 systems. The other AlphaServers including the DS10L and ES45 systems are not supported for arbitrated loop.
Supported SCSI
Supported SCSISupported SCSI
Supported SCSI
Controllers
ControllersControllers
Controllers
The systems are connected to shared SCSI buses using an adapter from the following list. The TruCluster Server
Cluster
Hardware Configuration
manual and
Release Notes
provide more information regarding SCSI controller configuration,
respectively:
KZPSA - PCI to Fast Wide Differential SCSI-2 adapter
KZPBA-CB/CC - PCI to UltraSCSI wide differential adapter
KZPEA-DB
1
- LVD Multimode U3 PCI SCSI Adapter
NOTE:
NOTE: NOTE:
NOTE:
KZPEA only supported for shared bus with one or two hosts. TruCluster V5.1B-1 Initial Patch Kit (IPK) is required.
Supported SCSI Signal
Supported SCSI SignalSupported SCSI Signal
Supported SCSI Signal
Converters
ConvertersConverters
Converters
TruCluster Server supports the following SCSI signal converters. The Cluster Hardware Configuration manual provides
information regarding supported SCSI signal converters configuration.
Signal Converter
Signal ConverterSignal Converter
Signal Converter
Description
DescriptionDescription
Description
DWZZA-AA
Standalone unit, single-ended/narrow to differential/narrow
DWZZA-VA
SBB, single-ended/narrow to differential/narrow
DWZZB-AA
Standalone unit, single-ended/wide to differential/wide
DWZZB-VW
SBB, single-ended/wide to differential/wide
DS-DWZZH-03
UltraSCSI hub
DS-DWZZH-05
UltraSCSI hub
3X-DWZCV-BA
HVD to LVD converter
QuickSpecs
HP TruCluster Server V5.1B-1
HP TruCluster Server V5.1B-1HP TruCluster Server V5.1B-1
HP TruCluster Server V5.1B-1
Storage Hardware Requirements
DA - 11444 Worldwide — Version 4 — December 8, 2003
Page 14
