20 HP StorageWorks Disk Array XP Operating System Configuration Guide: HP-UX
Installation procedures
Perform these actions to install and configure the disk array:
1. Install and configure the disk array (see page 21)
• Setting the host mode for the disk array ports
• Setting the System Option Modes
• Configuring the Fibre Channel ports
2. Install and configure the host (see page 26)
• Loading the OS and software
• Installing and configuring the HBAs
• Clustering and fabric zoning
• Fabric zoning and LUN security for multiple operating systems
3. Connect the disk array (see page 29)
• Defining the paths
• Verifying HBA installation
• Verifying device recognition
4. Configure disk array devices (see page 35)
• Verifying the device files and drivers
• Creating the device files
• Creating the physical volumes
• Creating new volume groups
• Creating logical volumes
• Creating the file systems
• Setting the I/O timeout parameter
• Creating the mount directories
• Mounting and verifying the file systems
• Setting and verifying the auto-mount parameters
