A SERVICE OF

logo

Document 800-01123 Rev B 17
02/08
Sync Control/Line-lock Setup
This screen allows you to synchronize the vertical interval
sync pulse of your camera with other equipment to reduce
the effect of picture roll on the monitor. Line lock mode is
only available when using 24 VAC power.
Figure 8 Sync Control Setup
Menu Item Description
INTERNAL When line lock is not required.
LINELOCK Adjust the vertical phase (VPH):
VPH: 000–359 (factory default is 0)
RETURN Press ENTER (SET) to return to the SETUP menu.
<SYNC. CONTROL>
SYNC INT (L/L)