10
41545-01 6/10/2002
®
Some fans are shipped with the
decorative upper and lower housings
detached from the fan motor. This
step tells you how to attach the hous-
ing. If the housing for your fan is al-
ready attached to the fan motor, go
directly to STEP 4 - ASSEMBLING THE
FAN.
1. Fit the upper fan housing on the
motor hanger adapter. Make sure
the tabs in the motor hanger
adapter fit into the notches in the
upper housing as shown in Fig-
ure 3a.
2. Attach the upper fan housing to
the motor hanger adapter with
three 1/2" screws and lockwash-
ers as shown in Figure 3b.
STEP 3 - ASSEMBLING HOUSINGS
3. Attach the bottom cover to the
upper fan housing with thrubolts
and acorn nuts as shown in Fig-
ure 3b, or with #6-32 screws and
lockwashers as shown in Figure
3c – depending upon style of fan.
Motor Hanger
Adaptor
Upper Fan
Housing
Acorn Nut
Washer
Thrubolt
Bottom Cover
Upper Fan
Housing
Bottom Cover
#6-32 Screw
with Lockwasher
Figure 3b - Assembling and Attaching
Housings to Motor Hanger Adapter
Figure 3c - Attaching Bottom Cover to
Upper Fan Housing
Figure 3a - Motor Hanger Adapter
Tabs and Upper Housing Notches
Upper Housing
Notches
Motor Hanger
Adaptor Tab
