A SERVICE OF

logo

STEP 10:
Slide the SEAT BRACKET (#5) onto the
aluminum track on the MAIN FRAME (#1).
Attach the BACKREST BOARD (#7) to the
SEAT BRACKET at the front. Then attach the
BACKREST BOARD COVER to the SEAT
BRACKET at the back. Align the four holes
and secure them with four ALLEN KEY BOLTS.
STEP 11:
Attach the SEAT ADJUSTMENT KNOB (#9)
onto the right side of SEAT BRACKET (#5).
STEP 12:
Insert the hand pulse sensor wire on the REAR
HANDLEBAR (#8) through the hole on the
SEAT BRACKET (#5) into the Aluminum track
on the MAIN FRAME (#1).
8