A SERVICE OF

logo

Open as PDF
next previous
21
Using the keypad buttons
Most buttons are described in detail in other sections, but here is an overview of
their functions:
Power–turns the
projector on and off (page 8).
Auto–resy
nchronize the projector to the source.
Menu–opens the
onscreen menus (page 24).
Enter–a
cts as a Select button in the OSD menu and is used for USB storage device
operation (page 37).
Up/Down/Left/Right arrows–When the
menu is displayed, the up and down
buttons navigate through the menu; the left and right buttons are used for
adjustment. The left button also allows you to go back to the previous menu.
Keystone–
adjusts the squareness of the image (page 9).
Source–brings up a menu of all possible sources allowing the user to switch the
active source (page 8).
Blank–blanks the
screen.
menu navigation
buttons