31
NS-48D510NA15 Insignia 48" LED TV
www.insigniaproducts.com
DVI (same as HDMI but requires an audio connection)
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the computer.
3 Connect the other end of the cable to the HDMI jack on the side or back of your TV.
4 Connect an audio cable (not provided) to the DVI AUDIO IN jack on the side of your TV and to the AUDIO OUT
(headphone) jack on the computer.
5 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or
T
to select HDMI 1 or HDMI 2, then press ENTER.
8 Adjust the display properties on the computer, if necessary.
Note
You can use either HDMI jack to connect a computer using DVI.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
HDMI cable
connector
Audio cable
connector
HDMI jack PC/DVI
AUDIO IN
jack
On your TV
HDMI cable with
HDMI-DVI adapter
Audio cable
Side of TV
Back of TV
