High Availability for Windows Demo Guide — September 2004 13
Preparing to Run the Demo
[CCS.1]
! Q.931 Timer Values in milliseconds
Setparm=0x0b,4000 ! Q.931 timer 303. Default=4000 msec.
Setparm=0x0d,4000 ! Q.931 timer 305. Default=4000 msec.
Setparm=0x0e,4000 ! Q.931 timer 308. Default=4000 msec.
Setparm=0x0f,10000 ! Q.931 timer 310. Default=10000 msec.
Setparm=0x10,4000 ! Q.931 timer 313. Default=4000 msec.
Setparm=0x15,1000 ! TEI retry timer Default=1000 msec.
Setparm=0x16,900 ! TEI state 4 min stability time. Default=900 msec.
Setparm=0x13,0 ! Symmetrical C.R. protocol. 0=disable 1=enable
Setparm=0x18,0 ! Enable Feature Test
Setparm=0x17,0 ! ISDN Protocol Mode. 0 = USER_MODE; 1=NETWORK_MODE
Setparm=0x7,11 ! CCS_SWITCH_TYPE - QSIGE1 = 10, QSIGT1 = 11
Setparm=0x9,0 ! 0=disabled, 1=enable Layer 2 access.
! When Layer 2 access is enabled call control is no longer
! supported for the channels on this line.
[CCS.2]
! Q.931 Timer Values in milliseconds
Setparm=0x0b,4000 ! Q.931 timer 303. Default=4000 msec.
Setparm=0x0d,4000 ! Q.931 timer 305. Default=4000 msec.
Setparm=0x0e,4000 ! Q.931 timer 308. Default=4000 msec.
Setparm=0x0f,10000 ! Q.931 timer 310. Default=10000 msec.
Setparm=0x10,4000 ! Q.931 timer 313. Default=4000 msec.
Setparm=0x15,1000 ! TEI retry timer Default=1000 msec.
Setparm=0x16,900 ! TEI state 4 min stability time. Default=900 msec.
Setparm=0x13,0 ! Symmetrical C.R. protocol. 0=disable 1=enable
Setparm=0x18,0 ! Enable Feature Test
Setparm=0x17,1 ! ISDN Protocol Mode. 0 = USER_MODE; 1=NETWORK_MODE
Setparm=0x7,11 ! CCS_SWITCH_TYPE - QSIGE1 = 10, QSIGT1 = 11
Setparm=0x9,0 ! 0=disabled, 1=enable Layer 2 access.
! When Layer 2 access is enabled call control is no longer
! supported for the channels on this line.
[CCS.3]
! Q.931 Timer Values in milliseconds
Setparm=0x0b,4000 ! Q.931 timer 303. Default=4000 msec.
Setparm=0x0d,4000 ! Q.931 timer 305. Default=4000 msec.
Setparm=0x0e,4000 ! Q.931 timer 308. Default=4000 msec.
Setparm=0x0f,10000 ! Q.931 timer 310. Default=10000 msec.
Setparm=0x10,4000 ! Q.931 timer 313. Default=4000 msec.
Setparm=0x15,1000 ! TEI retry timer Default=1000 msec.
Setparm=0x16,900 ! TEI state 4 min stability time. Default=900 msec.
Setparm=0x13,0 ! Symmetrical C.R. protocol. 0=disable 1=enable
Setparm=0x18,0 ! Enable Feature Test
Setparm=0x17,0 ! ISDN Protocol Mode. 0 = USER_MODE; 1=NETWORK_MODE
Setparm=0x7,11 ! CCS_SWITCH_TYPE - QSIGE1 = 10, QSIGT1 = 11
Setparm=0x9,0 ! 0=disabled, 1=enable Layer 2 access.
! When Layer 2 access is enabled call control is no longer
! supported for the channels on this line.
[CCS.4]
! Q.931 Timer Values in milliseconds
Setparm=0x0b,4000 ! Q.931 timer 303. Default=4000 msec.
Setparm=0x0d,4000 ! Q.931 timer 305. Default=4000 msec.
Setparm=0x0e,4000 ! Q.931 timer 308. Default=4000 msec.
Setparm=0x0f,10000 ! Q.931 timer 310. Default=10000 msec.
Setparm=0x10,4000 ! Q.931 timer 313. Default=4000 msec.
Setparm=0x15,1000 ! TEI retry timer Default=1000 msec.
Setparm=0x16,900 ! TEI state 4 min stability time. Default=900 msec.
Setparm=0x13,0 ! Symmetrical C.R. protocol. 0=disable 1=enable
Setparm=0x18,0 ! Enable Feature Test
Setparm=0x17,1 ! ISDN Protocol Mode. 0 = USER_MODE; 1=NETWORK_MODE
Setparm=0x7,11 ! CCS_SWITCH_TYPE - QSIGE1 = 10, QSIGT1 = 11
Setparm=0x9,0 ! 0=disabled, 1=enable Layer 2 access.
! When Layer 2 access is enabled call control is no longer
! supported for the channels on this line.
4. Save and close the updated .config file.
5. Use the fcdgen utility to generate an updated .fcd file for your Intel® NetStructure board.
6. Download the .pcd file and the updated .fcd file to your board(s) and start the Intel® Dialogic
System Services using the procedures outlined in the Intel® NetStructure™ on DM3™
Architecture for cPCI Configuration Guide.
