English
21
3.4. Integrated Peripherals
ΓΈ This menu allows you to control the various ports of the computer such as IDE,
SATA, USB, IEEE1394, COM port, LPT port, AC97 audio, etc.
n On-Chip Primary PCI IDE
Allows the user to enable or disable the first onboard IDE channel.
(default:Enabled)
n On-Chip SATA Mode
Options: Disabled (Disable this function.)
Auto (BIOS will detect automatically)
Combined (Support up to 4 hard drives: Two for SATA ports and two for
PATA IDE ports)
Enhanced (Allow up to 4 hard drives to be used)
Non-Combined (SATA will be configured to PATA mode)(default:Enhanced)
n No-Execute Memory Protect
(Note)
Allows user to enable the No-Execute Memory Protect function. (default: Enabled)
n CPU Enhanced Halt (C1E)
(Note)
Allows user to enable the CPU Enhanced Halt (C1E) function. (default: Enabled)
n CPU Thermal Monitor 2(TM2)
(Note)
Allows user to enable the CPU Thermal Monitor 2(TM2) function.(default: Enabled)
n CPU EIST Function
(Note)
Allows user to enable the CPU EIST function.(default: Enabled)
n On-Chip Frame Buffer Size
Allows user to set the size of the on-chip frame buffer.
Options: 1MB/4MB/8MB/16MB/32MB (default:8MB)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Integrated Peripherals
On-Chip Primary PCI IDE [Enabled]
On-Chip SATA Mode [Enhanced]
x PATA IDE Set to Ch.0 Master/Slave
SATA Port 0/2 Set to Ch.2 Master/Slave
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
AC97 Audio [Auto]
Onboard H/W LAN [Enabled]
OnBoard LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level}
If a hard disk
controller card is
used, set at Disabled
[Enabled]
Enable onboard IDE
PORT
[Disabled]
Disable onboard IDE
PORT
(Note) If the installed CPU supports this function, the system will automatically provide this
option.
