5 SAFETY INSPECTION
Part No 1171880 27 Invacare
®
Top End Reveal
™
Wheelchair
❑ Inspect wheel/fork assembly for proper tension by spinning caster; caster should come to a gradual stop.
❑ If caster flutter occurs, tighten fork stem nut to set needed drag.
❑ Inspect tires for flat spots, damage and wear. Replace as required.
❑ If pneumatic tires check for proper inflation.
Inspect/Adjust Monthly
❑ Ensure wheel locks DO NOT interfere with tires when rolling.
❑ Ensure that the casters are free of debris and caster assembly fastened tightly.
❑ Inspect upholstery fastening flaps to ensure they securely latch.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged.
Replace if necessary.
❑ Ensure camber bar mounting clamps are securely tightened.
❑ Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure that folding back is fully locking into place when back is open. Adjust as needed.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Ensure fasteners holding seat upholstery are all tight. Tighten and/or replace fasteners as required.
Inspect/Adjust Periodically
❑ Ensure wheelchair rolls straight (no excessive drag/pull to one side).
❑ Ensure wheel locks are easy to engage.
❑ Ensure that the casters are free of debris.
❑ Inspect seat and back upholstery for rips or sagging.
❑ Ensure camber bar mounting clamps are securely tightened.
❑ Ensure no excessive side movement or binding when lifted and spun.
❑ Inspect handrims for signs of rough edges or peeling.
❑ Clean upholstery and armrests.
