Invacare 1900 Manual

A SERVICE OF

next previous

SECTION 2—OPERATING THE BATH LIFT

Part No. 1148113 15 1900/1900S Bath Lift

Removing/Installing the Safety Strap

ƽ WARNING

DO NOT put the safety strap in the dryer. The high heat will melt the belt’s material.

NOTE:Forthisprocedure,refertoFIGURE 2.10.

NOTE:ThesafetystrapMUSTbewashedanddisinfectedaftereachuse.

1. Unbucklethesafetystrapbypullingupthehook‐and‐loopstriponthebuckle.

2. Pullthehook‐and‐loopstripthroughthebuckle(Detail“A”).

3. Removethesafetystrapfromthechair.

4. RepeatSTEPS1to3fortheotherside.

5. Wrapthenewsafetystraparoundtheliftframe.

6. Insertthehook‐and‐loopstripthroughthebuckleandsecureittothechairframe

(Detail“B”).

7. RepeatSTEPS5and6fortheotherside.

FIGURE 2.10 Removing/Installing the Safety Strap

Installing/Removing the

Shoulder Strap

NOTE:Forthisprocedure,referto

FIGURE 2.11.

NOTE:Toremovetheshoulderstrap,reverse

thisprocedure.

1. Insertthebeltthroughthebracketat

thetopofthechair.

2. Loopthehook‐and‐loopstripthrough

thebracketandsecurethestrap.

FIGURE 2.11 Installing/Removing the

Shoulder Strap

Buckle

Hook-and-Loop Strip

Chair Frame

Safety Strap

Buckle

Hook-and-Loop Strip

Chair Frame

Safety Strap

DETAIL “A”

DETAIL “B”

Shoulder

Strap

Chair

Hook-

and-Loop

Strip