19
Make use of this terminal for camera angle
adjustment during installation or focus
adjustment in the Focus Assist mode. Connect it
to devices such as a video monitor using a video
cable (RCA).
Memo:
● It is convenient to adjust focus using focus
assist mode. (A Page 24)
Note:
● A longer cable extension distance causes
signals to be attenuated, image resolution to
deteriorate and noise to increase.
Memo:
● Select the signal system for the monitor
output using the[MONITOR OUT]switch at
the side of this product. (A
NTSC
B
or A
PAL
B
)
After adjusting the camera angle, set the
switch to A
OFF
B
. After changing the switch
settings, press the [RESET] button to reboot
the camera.
Connect the mini jack R3.5 stereo cable.
L ch : Connect to speakers with built-in
amplifier, etc.
R ch : Connect to plug-in power type capacitor
microphone
Note:
● Make sure that the external microphone is
connected to the R ch and not other
channels. When the microphone jack is
plugged directly into the unit's [AUDIO IN/
OUT] terminal, loud noises can be
distributed to the network.
Monitor Signal Output Terminal
Connection
CAUTION
: NEVER USE
PoE
AND
AC 24V
ATTHE SAMETIME
DO NOT CONNECTTOTHETELEPHONE NETWORK
SEE INSTRUCTION MANUAL
CLASS 2 ONLY FOR USA
ISOLATED POWER ONL
Y
FOR EUROPE AND OTHER
MONITOR
OUT
AUDIO
10BASE-T/
100BASE-TX
PUSH
OUTPUT
ALARM
INPUT
2
AC24V
1
PoE
G
2 1
2 1
IN/OUT
Audio Signal Input/Output
Terminal Connection
CAUTION
: NEVER USE
PoE
AND
AC 24V
AT THE SAMETIME
DO NOT CONNECTTOTHETELEPHONE NETWORK
SEE INSTRUCTION MANUAL
CLASS 2 ONLY FOR USA
ISOLATED POWER ONL
Y
FOR EUROPE AND O
THER
MONITOR
OUT
AUDIO
10BASE-T/
100BASE-TX
PUSH
OUTPUT
ALARM
INPUT
2
AC24V
1
PoE
G
2 1
2 1
IN/OUT
G
Speakers with
Built-in Amplifier
Condenser
microphone
compatible with
plug in power.
L ch
R ch
Line Out
