Kenwood LZ-612IR Manual

next previous

LZ-612IR

Before mounting the monitor to the headrest:

• Performtherequiredexternalconnectionsfirst(Accessory②).

• Usingthesuppliedpapertemplate(Accessory⑤), mark the area to be cut out of the headrest, then carefully

cut it.

1ConnectMonitorandmonitorconnectioncord(Accessory②).

2Installthemonitorunitinthebracket(Accessory⑥).

Installation for Monitor Unit

Installation

Removing the Monitor Unit

1Inserttheremovaltool(Accessory⑦) deeply into

theslotsonTOPside,asshown.

Accessory⑦

2Pullthemonitorunitallthewayoutwithyour

hands, being careful not to drop it.

Installation for Hideaway Unit

Usescrews(Accessory⑧)tofixHideawayUnitonto

an audio board or another.

Accessory⑧

Headrest

Template

(Accessory⑤)

Monitor Unit

Screws

(not supplied)

Installation plate (not supplied)

MountingBracket

(Accessory⑥)

MonitorCable

(Accessory②)

1-LZ-612IR_ENG_0405.indd 10 2010-04-05 �� 5:11:59