10
If range does not
operate:
ࠜ Check that the circuit breaker is not
tripped or the house fuse blown.
ࠜ Check that the power supply cord is
plugged into the outlet.
ࠜ See Use and Care Guide for
troubleshooting list.
If you need assistance:
If you have questions about operating,
cleaning or maintaining your range:
ࠜ Refer to Use and Care Guide.
ࠜ The KitchenAid Customer Interaction
Center will answer any questions
about operating or maintaining your
range not covered in the Installation
Instructions. The KitchenAid
Customer Interaction Center is open
24 hours a day, 7 days a week. Just
dial 1-800-422-1230 – the call is free
within the continental United States.
When you call, you will need the
range model number and serial
number. Both numbers can be found
on the model/serial rating plate
located on the oven frame behind
the door.
If you need service:
In the event that your KitchenAid
appliance should need service, call the
dealer from whom you purchased the
appliance or a KitchenAid-authorized
service company. A KitchenAid-
authorized service company is listed in
the Yellow Pages of your telephone
directory under “Appliances – Household
– Major – Service & Repair.“ You can also
obtain the service company’s name and
number by dialing, free within the
continental United States, the KitchenAid
Customer Interaction Center telephone
number, 1-800-422-1230. A special
operator will tell you the name of your
nearest KitchenAid-authorized service
company.
Maintain the quality built into your
KitchenAid appliance — call a
KitchenAid-authorized service company.
When moving range, slide range onto
cardboard or hardboard to prevent
damaging the floor covering.
If removing the range is necessary for
cleaning or maintenance:
1. Unplug range or disconnect power.
2. Slide range forward to complete
cleaning or maintenance.
3. Make sure the anti-tip bracket is
installed:
• Look for the anti-tip bracket securely
attached to floor.
• Slide range back so rear range foot
is under anti-tip bracket.
anti-tip
bracket
range foot
4. Check that range is level.
5. Plug in range or reconnect power.
