8 GB/IE
Before the First Usage
First steps
• Carefully remove the slicer from its packaging,
remove all packaging materials and keep them
together with the main packaging.
• Clean the slicer before it comes into contact
with any foodstuffs (see also the chapter
‘Cleaning’).
Setting up the appliance
m Specific safety advice on the placing
of the appliance
1. Never set the slicer up on a hot surface or
near an open flame.
2. Ensure that the power cable does not pass
over hot or sharp-edged objects.
3. Do not allow the power cable to become
kinked or trapped and do not wrap it around
the slicer.
• Set the slicer up on a flat, non-slip surface
close to a power socket.
• Unwind the required length of power cable
I
.
Insert the plug into the power socket.
• Place the food carriage
P
on the supporting
table with guide slot
O
. Now press the on
the blade cover
Y
high standing side down,
so that the holding clamps (on the underside
of the food carriage
P
) engage. Ensure that
these have correctly engaged, in that you
check the mobility of the food carriage.
Pull to the front for removal of the food car
-
riage
P
from the guide slot
O
and lift it from
the support table.
• Push the food holder plate
{
on to the food
carriage.
• Place the catch tray
t
below the support
table and on the housing such that the sliced
foods can fall in there directly and without
hindrance after being cut.
Adjust the infinite slice-thickness
setting (see Fig. D)
Through variable tightenings of the adjusting
screws
r
you can determine the movement rate
of the infinite slice-thickness setting
w
.
• Screw both of the adjusting screws
r
tight
with the screwdriver
e
.
• Check, by turning the infinite slice-thickness
control knob
w
, to see if the desired movement
rate is suitable.
If it is not,
- loosen both adjusting screws
r
for a lighter
movement rate or
- tighten both adjusting screws
r
further for
a stiffer movement rate.
Operation
Working advice
m Specific safety advice for slicing and for
the handling of the appliance
1. Never touch the blade when the slicer is in
operation!
There is a risk of grave personal injury!
2. Always use the food carriage
P
and the food
holder plate
{
.
(Exception: very large pieces of foodstuff).
Press the pieces of food to be sliced forward
using the food holder
{
.
3. Use the slicer only for cutting normal household
foods and not for other purposes. Do not use
Before the First Usage / Operation
