Scanning With the Machine192
Editing/Deleting Group Dial Destinations
Information registered with a group dial destination can be edited or deleted.
1 In the main screen (Scan mode), press the + or , key to select UTIL-
ITY
, and then press the Select key.
2 Press the + or , key to select DIAL REGISTER, and then press the
Select key.
3 Press the + or , key to select GROUP DIAL, and then press the Select
key.
4 Use the keypad to type in the number (between 1 and 20) for the group
dial destination to be edited/deleted, and then press the Select key.
The information currently registered for the group dial destination appears
for about two seconds.
5 Press the + or , key to select EDIT to edit information or DELETE to
delete the destination, and then press the Select key.
If
DELETE was selected, the settings are deleted, and the DIAL REG-
ISTER
menu appears again.
6 If desired, edit the group name, and then press the Select key.
" For details on entering/editing text, refer to “Entering Text” on page
323.
7 Press the + or , key to select ADD to add a speed dial destination,
CHECK/EDIT to delete the destination or FINISH to finish editing, and
then press the Select key.
If
FINISH was selected, the edited settings are saved, and the DIAL
REGISTER
menu appears again. If ADD was selected, continue with step
6 of “Registering Group Dial Destinations” on page 191. If CHECK/EDIT
was selected, continue with step 8.
8 Press the + or , key to select the speed dial destination to be deleted,
and then press the Stop/Reset key.
" To check the settings for the selected speed dial destination, press
the Select key.
9 Press the + or , key to select Yes, and then press the Select key.
10 After the speed dial destination is deleted, press the Back key.
11 To delete another speed dial destination, repeat the procedure from step
8.
