Model: 616-146v2 www.lacrossetechnology.com/support Page | 3
SET TIME ALARM
1. Hold the ALARM button to enter alarm time set mode.
2. Use the +/TEMP or -/TIME buttons to adjust values.
3. Press the ALARM button to confirm adjustments and move to the
next item.
Alarm Time setting order:
1. Hours
2. Minutes
ACTIVATE/DEACTIVATE TIME ALARM
• Press the ALARM button once to view alarm time.
• Press the ALARM button again to activate the alarm.
Bell icon appears.
• Press the ALARM button again to deactivate the alarm.
The bell icon disappears.
SNOOZE (Silences alarm temporarily)
• Press the SNOOZE/LIGHT button to silence alarm for 9 minutes.
• Zz will show.
• When in snooze mode, press ALARM to stop alarm for one day.
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut off completely.
BACKLIGHT AND PROJECTION INTENSITY
Press and release the SNOOZE/LIGHT button to adjust the
brightness of the backlight and projection image (together):
• High
• Low
• OFF
Note: When the Adapter is NOT in use, the High/Low/On/Off features
are not available.
PROJECTION (On/Off, rotate, projection mode)
Battery Power: Press and release the SNOOZE/LIGHT button to
show the projection for 10 seconds.
A/C Power: Projection is displayed constantly unless turned off.
Note: Projection will not display constantly when operating on battery
power.
Bell Icon
