FRONT PANEL CONTROL
• Power / Power indicator :
Press this knob to switch ON/OFF of monitor’s power. and display the
monitor’s state.
Blue
— Power On mode.
Orange — Power Off mode.
• MENU/ENTER / :
Activate OSD menu or function adjusts confirmation.
• Contrast / ▼:
Adjust contrast or function adjustment.
• Brightness / ▲:
Adjust brightness or function adjustment.
• Auto Config Key / EXIT/ :
1. When OSD menu is in active status, this knob will act as EXIT-KEY
(EXIT OSD menu).
2. When OSD menu is in off status, press this knob over 1 seconds to be
in Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and
Focus automatically.
NOTES
• Do not install the monitor in a location near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally
packed at the factory.
• To keep the LCD clean, periodically clean it with a soft cloth. Any kind of
liquids will damage the LCD.
• To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
9
