• The integrated management module (IMM) can turn off the server as an automatic response to a critical
system failure.
Connecting external devices
If you install a supported optional adapter, you can attach external devices to the server.
To attach an external device, do the following:
Note: If you are attaching an external device, see the documentation that comes with the device for
information about cabling.
1. Read and understand the Safety Information on the ThinkServer Documentation DVD that comes with
your product, and “Guidelines” on page 29
. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
2. Turn off the server and all attached devices.
3. Follow the instructions that come with the device to prepare it for installation and to connect it to
the server.
Updating the server conguration
When you start the server for the rst time after you install or remove an internal option or external device,
you might receive a message saying that the conguration has changed. The Setup Utility program starts
automatically so that you can save the new conguration settings.
Some options have device drivers that you must install. For information about installing device drivers, see
the documentation that comes with each option.
You can obtain device drivers for operating systems that are not preinstalled at
http://www.lenovo.com/support. Installation instructions are provided in readme les with the device
driver les.
68 ThinkServer TS130 Hardware Maintenance Manual
