A SERVICE OF

logo

58
IdeaPad Z500/P500 Hardware Maintenance Manual
Figure 14. Removal steps of LCD unit (continued)
Release the LCD cable from the cable guides in the direction shown by arrows
2
. Then lift the LCD hinge in the direction shown by arrow
3
.
3
2
2
2
3
When installing:
Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached rmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
Remove the keyboard bezel from the LCD unit in the direction shown by arrows
4
.
4