Custom Names menu
Menu item Definition
Custom Name [x]
[none]
Specify a custom name for a paper type. This name replaces the Custom
Type [x] name in the printer menus.
Custom Scan Sizes menu
Menu item Description
Custom Scan Size [x]
Scan Size Name
Width
1–11.69 inches (25–297 mm)
Height
1–17 inches (25–432 mm)
Orientation
Portrait
Landscape
2 scans per side
Off
On
Specifies a custom scan size name, scan sizes, and options. The custom scan
size name replaces Custom Scan Size [x] in the printer menus.
Notes:
• 11.69 inches is the US factory default setting for Width. 297 millimeters
is the international factory default setting for Width.
• 17 inches is the US factory default setting for Height. 432 millimeters is
the international factory default setting for Height.
• Portrait is the factory default setting for Orientation.
• Off is the factory default setting for 2 scans per side.
Universal Setup menu
Menu item Description
Units of Measure
Inches
Millimeters
Identifies the unit of measure
Note: Inches is the US factory default setting. Millimeters is the
international factory default setting.
Portrait Width
3–14.17 inches
76–360 mm
Sets the portrait width
Notes:
• 8.5 inches is the US factory default setting. Inches can be increased
in 0.01‑inch increments.
• 216 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
Understanding printer menus 134
